Standard configuration
|
|
LP-600 |
| Die cutting area |
MM |
500*580 |
| Bilateral running speed |
pcs/h |
1000 |
| Unilateral feeding cycle |
S |
≤5 |
| Single-side feeding stroke |
MM |
650 |
| Stroke adjustment amount |
MM |
9 |
| Positioning accuracy of repeated feeding |
MM |
±0.15 |
| Total power |
KW |
AC380V 7.5KW |
| Lubrication method |
|
Automatic circulating oil supply |
| Pressure adjustment method |
|
Automatic pressure adjustment and automatic locking |
| Die cutting pressure |
T |
15 |
| Choose a knife mold |
|
Wooden board mold, rubber board mold |
| Dimensions |
MM |
2780*1150*1450 |
| Machine weight |
KG |
2500 |
Features and function description:
1. The upper plate of the upper mold base adopts a frame locking type: the upper template is lighter, and the upper and lower templates are easy to replace the knife molds, so as to facilitate the operation of the starter (the upper template of the die-cutting machine on the market is composed of a whole aluminum plate, which causes the starter to load and unload the knife Increased difficulty);
2. The whole machine is fully automatic oil supply;
3. The double-sided feeding system is adopted, which can install the knife mold on the double-sided movable template to carry out the punching operation of manual feeding;
4. A simple operation panel is added to the bilateral feeding template for easy operation
Available molds: engraving mold, etching mold, rubber mold, wood mold
