Standard configuration
1. Big pull wave steel roll;
2. Two sets of unwinding and four receiving, both sets of unwinding shafts are equipped with motors;
3. Photoelectric feeder + die cutting host + ordinary slicer;
4. Equipped with two standard upper die thick lumber boards;
5. With two standard templates;
6. Equipped with a three-color light;
7. The touch screen has a protective cover;
8. Metal mold blanking hole 200*140;
9. Light curtain for operating side safety protection;
10. Hardware molds can be installed, but QDC molds cannot be installed. The closed height of the hardware molds is 80-85mm.
|
|
LB-350 |
| Feeding width |
MM |
360 |
| Maximum die cutting area |
MM |
350*290 |
| Production speed |
pcs/h |
1800-12000 |
| Stroke adjustment amount |
MM |
±12 |
| Cross cutting force |
T |
10 |
| Pulling accuracy |
MM |
±0.15 |
| Lubrication method |
|
Automatic lubrication system |
| Frame casting |
|
HT250 high quality gray iron |
| Total power |
KW |
AC380V 4KW |
| Dimensions |
MM |
L2600*W1360*H1800 |
| Net weight of the machine |
KG |
3800 |
Available mold: wood mold, laser mold, corrosion mold, engraving mold, hardware mold
