The working principle of die cutting machine:Die Cutting Machine (Die Cutting Machine) is also called beer machine, numerical control, servo hydraulic press, mainly used for the corresponding die-cutting of some non-metallic materials, stickers, EVA, double-sided tape, electronics, mobile phone protective film, etc. (Fully broken, half broken), indentation and bronzing operations, laminating, automatic waste removal, die-cutting machine uses steel knives, metal molds, steel wires (or templates carved from steel plates) to apply a certain pressure through the embossing plate , The printed product or cardboard is rolled and cut into a certain shape. If the entire printed product is press-cut into a single graphic product, it is called die-cutting: if a steel wire is used to make a mark on the printed product or a bend is left, it is called an indentation; if two stencils of male and female are used, the mold Heat to a certain temperature. Hot stamping of patterns or fonts with a three-dimensional effect on the surface of the printed product is called hot stamping; if one substrate is used to overlay another substrate, it is called laminating; except for the rest, it is called waste disposal; the above can be Collectively referred to as die-cutting technology, it is an important equipment for post-press packaging processing and shaping.

Pressure adjustment method of die cutting machine: 1. The positions of the two claw blocks and the gear plate can be adjusted. The claw blocks move upwards. The pressure increases and shears each action of the claw block. The distance between the two surfaces changes by about 0.1 mm, usually There is only one tooth when acting.2. When the claw block is at the last tooth of the tooth plate, you should consider replacing the new gear and eccentricity. The following

With the advancement of technology, the slicer equipment in the market today not only has excellent performance, but also has more complete functions, making it more convenient for users to use. First of all, from the appearance point of view, the slicer equipment uses a streamlined mold shell, so it does not need to be disassembled during use, and it is easy to clean and beautiful. Moreover, the equipment adopts a very advanced cross-roller guide, which is lubrication-free and maintenance-free, which ensures the accuracy of the specimen block sliding.

The working principle of the slicer is quite simple. It uses the sharp cutting surface of the slicer to cut food materials into slices according to the required proportions and specifications. This kind of machine can be used in many places, and different machine slicing methods and regulations are different. This kind of machine is also needed in the paper industry. The cutter head type machine is composed of a cutter head, a casing, a feeding trough and a transmission device. The working principle is to use a heavy cutter head to act as a flywheel to stabilize slices. . There is also a machine that cuts the material into particles. This machine is composed of a guide bar, a rotating cutter head, etc. Its working principle is: using the change of the cutter head

1. The compactly designed independent control panel effectively controls all important operations. 2. The built-in control panel and the independent control panel are fully synchronized. The LCD screen can prompt the total slice thickness and total slice, trimming thickness, slice thickness, and prompt important operating status. 3. Two sample vertical stop positions (up and down). 4. Five slicing modes: single, continuous, stepping, half-cutting, and programming. 5. The slicing speed is automatically adjusted according to the slice thickness. 6. The trimming function can be turned off. In the automatic state, the parameters of the repair block are automatically adjusted, and in the manual state, the parameters of the repair block can be programmed and determined. 7. Slice thickness and